|
Benefits and Technical Details
Ecoglo products meet or exceed the performance criteria specified in the following tests or standards:
|
| |
|
1. High Visibility in Dark or Light Conditions
Brightness:
ASTM E2073-02, Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings.
DIN 67510 Par 1, Phosphorescent Pigments and Products: Measurement and identification by the manufacturer.
ISO 17398:2004 Clause 7.11, Safety Colours and Safety Signs - Classification, Performance and Durability of Safety Signs.
UL1994 Luminous Egress Path Marking Systems
UL 924 Emergency Lighting and Power Equipment
ASTM E2072 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
|
| |
|
2. High Durability Indoors and Outdoors
UV Stability: ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials
Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus
Freeze-Thaw Resistance: ASTM C1026-87 (1996), Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling.
|
| |
|
3. Reduces Slips.
Slip Resistance: UL410, Standard for Slip Resistance for Floor Surface Materials.
AS/NZS 4586-1999, Slip Resistance Classification of New Pedestrian Surface Materials.
AS/NZS 4586-2004, Slip Resistance Classification of New Pedestrian Surface Materials - Appendix D (oil-wet ramp test)
|
| |
|
4. Hard Wearing.
Abrasion Resistance:
ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion.
ASTM B 244-97, Test Methods for Measurement of Anodic Coatings on Aluminium and other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments.
ASTM B137-95 (2000), Test Method for Measurement of Coating Mass per Unit Area of Anodically Coated Aluminium.
ASTM F510-93 (2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
JIS H8682-1:1999, Test Methods for Abrasion Resistance of Anodic Oxide Coatings on Aluminium and Aluminium Alloys - Wheel Wear Test.
|
| |
|
5. Easy Cleaning
Washability:
ASTM D4828-94 (2003), Standard Test Methods for Practical Washability of Organic Coatings.
ASTM B136-84 (1998), Standard Test Method for Measurement ofStain Resistance of Anodic Coatings an Aluminium.
|
| |
|
6. No Radioactivity or Toxicity
Radioactivity: ASTM D3648-2004, Standard Practices for the Measurement of Radioactivity
Toxicity: Bombardier SMP 800-C (2000), Toxic Gas Generation Test.
|
| |
|
7. Does Not Burn
Flammability:
ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.
|
